BKSDR-RHP
Cover with non-slip embossing and turning bolts for floor duct riser bend.
The cover consists of a 2 mm thick galvanized sheet steel with 1 mm non-slip embossing and slip resistance R12 according to DIN 51130. In compliance with the installation specifications and a maximum compartment size of 200 mm, the cover guarantees a tested load capacity of at least 500 kg according to EN 50085-2-2.
Continously hot galvanized (Sendzimir process) (DIN EN 10346)
| Артикул | Product | height | width | length |
t
material thickness
|
Pmax
Maximum load
| weight |
slip resistance class
slip resistance according to DIN 51130
| |
|---|---|---|---|---|---|---|---|---|---|
| BKSDR-RHP 10S | 200 mm | 100 mm | 200 mm | 2.00 mm | 5 kN | 0.76 kg | R12 | ||
| BKSDR-RHP 15S | 200 mm | 150 mm | 200 mm | 2.00 mm | 5 kN | 1.02 kg | R12 | ||
| BKSDR-RHP 20S | 200 mm | 200 mm | 200 mm | 2.00 mm | 5 kN | 1.29 kg | R12 | ||
| BKSDR-RHP 30S | 200 mm | 300 mm | 200 mm | 2.00 mm | 5 kN | 1.82 kg | R12 | ||
| BKSDR-RHP 40S | 200 mm | 400 mm | 200 mm | 2.00 mm | 5 kN | 2.35 kg | R12 | ||
| BKSDR-RHP 50S | 200 mm | 500 mm | 200 mm | 2.00 mm | 5 kN | 2.88 kg | R12 | ||
| BKSDR-RHP 60S | 200 mm | 600 mm | 200 mm | 2.00 mm | 5 kN | 3.41 kg | R12 |
